PayrollCalculator

Category: Paycheck guides

Guides to reading a paycheck, converting salary figures, and checking gross and net pay.

  • How to Convert an Annual Salary to Monthly, Weekly and Hourly Pay

    Converting an annual salary into smaller pay periods makes it easier to compare pay and plan a budget. The arithmetic is straightforward, but the result depends on using the right number of periods and remembering that salary conversions normally start with gross pay, not take-home pay.

    Last reviewed: 27 Oct 2026 (Europe/London). Conversion math below is arithmetic only. Any tax figures cited are US federal 2026 amounts from IRS sources. Not tax advice.

    Start with the annual gross salary

    Use the annual earnings figure before taxes, pension contributions or other deductions. To find an average amount for a pay period, divide that annual figure by the number of those periods in a year.

    Pay per period = annual gross salary ÷ pay periods per year

    Pay frequency Periods per year Formula
    Monthly 12 Annual salary ÷ 12
    Biweekly 26 Annual salary ÷ 26
    Semimonthly 24 Annual salary ÷ 24
    Weekly 52 Annual salary ÷ 52

    Biweekly and semimonthly are not interchangeable. Biweekly pay arrives every two weeks, producing 26 pay periods in a standard year. Semimonthly pay arrives twice a month, producing 24 pay periods. Employers choose a payroll schedule; IRS Publication 15 discusses depositing and reporting on the employer’s schedule, while Publication 15-T explains how federal income tax withholding is figured for each payday from Form W-4 — neither publication turns a salary into take-home pay by simple division alone.

    Worked example: a $52,000 annual salary

    For an annual gross salary of $52,000, the conversions are:

    • Monthly: $52,000 ÷ 12 = $4,333.33 per month, rounded to the nearest cent.
    • Biweekly: $52,000 ÷ 26 = $2,000 every two weeks.
    • Semimonthly: $52,000 ÷ 24 = $2,166.67 twice a month, rounded to the nearest cent.
    • Weekly: $52,000 ÷ 52 = $1,000 per week.

    These figures describe the same annual salary across different pay frequencies. They do not represent four different pay rises or reductions.

    Convert an annual salary to an hourly rate

    An hourly conversion also needs the number of paid hours worked each week and the number of paid weeks included in the annual salary.

    Hourly rate = annual gross salary ÷ (paid hours per week × paid weeks per year)

    For example, if a $52,000 salary covers 40 paid hours a week across 52 paid weeks, the annual total is 2,080 paid hours:

    $52,000 ÷ 2,080 = $25 per hour

    The 2,080-hour denominator belongs to this specific 40-hour, 52-week assumption. A different weekly schedule or unpaid time away from work requires a different calculation. Do not assume that the same denominator applies to every role.

    Why the result may differ from a payslip

    A simple conversion gives an average gross amount. An individual payslip can differ because it includes additional earnings, unpaid time, corrections or deductions. Common items to check include:

    • Overtime, bonuses or allowances added to basic earnings.
    • A change in hours or pay rate during the period.
    • Unpaid leave or another adjustment to gross earnings.
    • Taxes, contributions and other deductions taken after gross pay is calculated.

    Federal FICA rates that often appear after gross pay (2026 employee shares: Social Security 6.2% up to the $184,500 wage base; Medicare 1.45% with no wage base) are stated in both IRS Topic 751 and Publication 15 (2026). Federal income tax withholding is separate and depends on Form W-4 plus Pub. 15-T — it is not a fixed percentage of the converted period amount.

    If the headline figures do not reconcile, follow the steps in how to check a payslip for common errors.

    Do not confuse salary conversion with take-home pay

    Dividing a salary by 12, 26 or 52 does not calculate the amount that will reach a bank account. Gross pay is the starting figure; net pay is what remains after deductions. The guide to gross pay and net pay explains that difference in more detail.

    For a paycheck estimate based on your own entries, you can use the site’s federal paycheck calculator. Treat the salary formulas above as arithmetic conversions rather than a determination of which deductions apply to you. To check whether federal income tax withholding looks roughly right for the year, use the official IRS Tax Withholding Estimator.

    A quick conversion checklist

    1. Confirm whether the starting figure is annual gross salary.
    2. Identify the actual pay frequency rather than guessing from the month.
    3. Use 12 for monthly, 26 for biweekly, 24 for semimonthly or 52 for weekly periods.
    4. For an hourly figure, state the paid-hours and paid-weeks assumptions.
    5. Keep gross-pay conversions separate from take-home-pay estimates.

    Writing down the formula and assumptions beside the result makes the calculation easy to check and prevents unlike pay figures from being compared directly.

    Sources (official)

  • Gross Pay and Net Pay: The Arithmetic Behind the Difference

    Every payslip tells the same story in two numbers. Gross pay is the amount agreed before anything is taken off. Net pay, sometimes called take-home pay, is the amount that actually reaches the bank account. The gap between them is not a single charge but a sequence of subtractions, each applied to a different base figure.

    Last reviewed: 27 Oct 2026 (Europe/London). Figures below are US federal employment-tax amounts for 2026 from IRS sources. This page is explanatory arithmetic, not tax advice.

    Gross pay: the starting point

    Gross pay is built from the terms of employment: an hourly rate multiplied by hours worked, a salary divided across the pay periods in a year, plus any overtime, bonus or allowance that counts as earnings. It is a figure of entitlement rather than receipt. When people talk about a salary, they normally mean the gross figure, which is why the amount arriving in a bank account can look unexpectedly small. For period conversions of an annual salary, see salary to monthly, weekly and hourly.

    Net pay: what remains

    Net pay is what is left once deductions have been applied in the correct order. The order matters because some deductions are calculated on gross pay, some on a reduced figure, and some are fixed amounts. Getting the sequence wrong is one of the commonest reasons a payslip fails to reconcile.

    The deductions in between

    • Federal income tax withholding — figured from the employee’s Form W-4 and the Percentage Method or Wage Bracket Method in IRS Publication 15-T. Withholding is an estimate toward the eventual tax liability; it is not the final tax.
    • Social Security tax (employee share) — for 2026, 6.2% of wages up to the Social Security wage base ($184,500 for earnings in 2026). Sources: IRS Topic 751; IRS Publication 15 (2026).
    • Medicare tax (employee share) — for 2026, 1.45% of covered wages, with no wage base limit. Same two IRS sources as above.
    • Additional Medicare Tax — employers withhold an extra 0.9% on wages paid to an employee in excess of $200,000 in a calendar year, without regard to filing status (Topic 751; Pub. 15). There is no employer match for this 0.9%.
    • Voluntary deductions — retirement contributions, insurance premiums, garnishments or other payroll elections shown on the slip.
    • Adjustments — repayments, advances or corrections carried over from a previous period.

    Each line should show a description and an amount, so the movement from gross to net is traceable rather than a mystery. State and local income taxes, where they apply, use state agency rules and are separate from these federal FICA figures.

    For the Social Security and Medicare rules in more detail, including the wage base, the employer match and the Additional Medicare Tax thresholds by filing status, see FICA taxes explained.

    Reading a payslip from top to bottom

    Start with gross earnings, subtract each deduction in turn, and the running total should land exactly on the stated net figure. If it does not, the discrepancy is usually one of three things: a deduction applied to the wrong base, a cumulative adjustment from an earlier period, or a rounding convention applied at a different stage of the calculation. Walk the same check with how to check a payslip for common errors.

    Why the difference matters

    Budgets are paid from net pay, while negotiations and contracts are quoted in gross. Knowing which figure you are looking at prevents over-committing on a new role and makes it easier to see what a change in hours or a voluntary contribution will actually do to the money you receive.

    For a quick check, enter gross earnings and deduction details into a payroll calculator and compare the result with the payslip. A payroll calculator performs the arithmetic; it does not determine what should be deducted. The IRS Tax Withholding Estimator is the official tool for checking whether federal income tax withholding looks roughly right for the year.

    Sources (official — two per figure)

  • How to Check a Payslip for Common Errors

    A payslip is a set of numbers that should reconcile with each other. You do not need to understand every rule behind it to spot something that has gone wrong — most errors show up as arithmetic that does not quite work. The routine below takes a few minutes and is worth doing each period rather than once a year.

    Last reviewed: 27 Oct 2026 (Europe/London). Tax year context: US federal employment taxes for 2026. This page is an estimate aid, not tax advice.

    Start with the headline figures

    Find your gross pay for the period, your total deductions and your net pay. Before checking anything else, confirm the relationship between them: gross pay minus total deductions should equal net pay. If that does not hold, the error is somewhere in the figures themselves rather than in a rate or an allowance, and payroll can usually trace it quickly. For how gross and net relate, see gross pay and net pay.

    Check hours and rates behind gross pay

    Gross pay should reflect the hours you actually worked. Compare the hours shown against your own record of shifts, overtime and any paid leave. Watch for overtime recorded at the basic rate, hours that failed to carry over from a timesheet, or a period where a pay change should have taken effect but did not. If your gross pay is a fixed salary, the amount should still match the figure you expect for that period, including any agreed adjustment. A simple conversion from annual salary to a period amount is in how to convert an annual salary.

    Work through the deductions line by line

    Deductions are where errors are easiest to miss, because they are often taken automatically. Read each line and ask whether you expect it to be there this period. Look for a deduction appearing twice, a deduction that should have stopped, a pension or benefit contribution that does not match the amount you elected, or a recovery for something you have already repaid. If a line is unfamiliar, note it down rather than guessing at its purpose.

    On a US payslip, common federal lines include federal income tax withholding (from Form W-4 and the methods in IRS Publication 15-T) and Social Security and Medicare (FICA) withholding. For 2026, IRS Topic 751 and Publication 15 (Circular E) both state the employee Social Security rate as 6.2% and the employee Medicare rate as 1.45% of covered wages (employer matches those rates). Social Security applies only up to the annual wage base; Medicare has no wage base. Additional Medicare Tax of 0.9% may also appear once wages exceed the employer withholding threshold described in Topic 751.

    If the Social Security or Medicare lines look wrong, our guide to FICA taxes: Social Security and Medicare withholding shows how each is calculated, with worked examples.

    Compare year-to-date figures

    Year-to-date figures should build on the previous payslip. Take last period’s year-to-date gross and add this period’s gross; the result should equal the new year-to-date figure. Repeat for deductions. A jump that does not follow from this period’s activity usually means an earlier period has been restated or a payment has been posted twice. Year-to-date Social Security wages should stop increasing once they reach the annual Social Security wage base for the year (for earnings in 2026, Topic 751 and Pub. 15 both list $184,500).

    Match boxes you will see later on Form W-2

    Your year-end Form W-2 summarises wages and federal tax withheld. Box meanings are defined in the IRS instructions for Form W-2 (for example Box 1 wages, Box 2 federal income tax withheld, Boxes 3–6 for Social Security and Medicare wages and tax). If a payslip line never appears in the matching W-2 box, ask payroll before filing. See About Form W-2 and the current General Instructions for Forms W-2 and W-3.

    What to do if something does not add up

    Contact payroll in writing, quoting the pay period and the specific line that looks wrong. Explain the arithmetic you expected and how you reached it. Keep the payslip and your own records until the query is resolved. Payroll teams see these questions routinely, and a precise query is far quicker to resolve than a general one. For a forward-looking estimate of federal withholding, the IRS publishes the Tax Withholding Estimator — use it alongside, not instead of, your own payslip check.

    Sources (official)